Search found 2335 matches

by kwerner
Wed Jul 28, 2021 11:26 pm
Forum: Miscellaneous WRF
Topic: Design coarse domain
Replies: 2
Views: 13

Re: Design coarse domain

The resolution ratio between the input data and the first domain can be more than 3:1 - up to about 7:1. If you are using input data with a resolution of 1 degree, you should be safe to use a 15km DX for your parent domain.
by kwerner
Wed Jul 28, 2021 11:23 pm
Forum: High-performance Computing
Topic: wrf.exe keeps running without any progress when increasing the number of processors
Replies: 7
Views: 1058

Re: wrf.exe keeps running without any progress when increasing the number of processors

@ag1993, What type of input data are you using for this? What is the resolution of that input data? If you are looking for realistic wind values for your time series, then you will still need larger domain sizes and many more vertical levels. We now recommend 45+ vertical levels. If you do not care ...
by kwerner
Wed Jul 28, 2021 11:12 pm
Forum: High-performance Computing
Topic: Maximal speed of run
Replies: 4
Views: 31

Re: Maximal speed of run

I'm not sure whether it's accurate to say that you would get the best performance when you have 10 grid cells per direction for each processor. That is the minimum number you can have in each direction, per processor, and since that would be the max number of processors you can use, then perhaps it ...
by kwerner
Wed Jul 28, 2021 11:07 pm
Forum: WRF Compiling/Installation
Topic: WRF 4-3 Self install script
Replies: 2
Views: 20

Re: WRF 4-3 Self install script

Hi Will,
Thanks for sharing this information! It's okay to leave here, but perhaps you should post it here as well.
by kwerner
Wed Jul 28, 2021 8:30 pm
Forum: Miscellaneous
Topic: [Question] WRF Workflow Management – Best Practice Recommendations
Replies: 2
Views: 31

Re: [Question] WRF Workflow Management – Best Practice Recommendations

Hi Lukas, I'm not sure if this meets all of your criteria, but our group worked closely with a cloud computing company - Scala Computing, which has a WRF application for continuous runs. It allows you to be mostly hands-off, while keeping things monitored. They have scripts that run everything, but ...
by kwerner
Wed Jul 28, 2021 8:22 pm
Forum: High-performance Computing
Topic: Maximal speed of run
Replies: 4
Views: 31

Re: Maximal speed of run

Hi, Please take a look at this FAQ that discusses choosing a good number of processors for your domain set-up. I also would like to point out that your domain size is too small for any real application. We recommend at least 100x100 per domain, and that's on the smaller end. Take a look at this web ...
by kwerner
Tue Jul 27, 2021 6:19 pm
Forum: High-performance Computing
Topic: wrf.exe keeps running without any progress when increasing the number of processors
Replies: 7
Views: 1058

Re: wrf.exe keeps running without any progress when increasing the number of processors

@ag1993, Unfortunately you are limited by the size of your domain, and even if you have access to many processors, you can't run with more than is appropriate. There may be other factors that are slowing down your run - such as specific physics settings, or other settings. If you'd like us to take a...
by kwerner
Tue Jul 27, 2021 6:11 pm
Forum: WRF Website
Topic: MPAS & WRF website application in Mexico
Replies: 1
Views: 30

Re: MPAS & WRF website application in Mexico

That's great! Thank you for letting us know. I'll let the MPAS team know so that they are aware.
by kwerner
Mon Jul 26, 2021 10:23 pm
Forum: real.exe
Topic: Error during real.exe
Replies: 1
Views: 25

Re: Error during real.exe

Hi,
Do you have rsl.error.* files from your run? If so, can you package those together in a *.tar (not .rar - we cannot open that format) and attach them for me? Thanks!
by kwerner
Mon Jul 26, 2021 10:19 pm
Forum: metgrid
Topic: (RESOLVED) ERROR: Error in ext_pkg_write_field in metgrid (WPS v4.0)
Replies: 3
Views: 57

Re: ERROR: Error in ext_pkg_write_field in metgrid (WPS v4.0)

Great - I'm glad you were able to find the problem! Thank you for letting me know.
by kwerner
Mon Jul 26, 2021 10:18 pm
Forum: geogrid
Topic: LAI12 and GREENFRAC in geo_em file v.s LAI and VEGFRA in wrfout file
Replies: 1
Views: 38

Re: LAI12 and GREENFRAC in geo_em file v.s LAI and VEGFRA in wrfout file

Hi Chang, You are correct that LAI12 is the Leaf Area Index for 12 months. GREENFRAC is a field interpolated from MODIS FPAR and is a 12-monthly field from geogrid. During the real.exe process, it will be interpolated to the model start time, and stored in the array "vegfra." However, if you're usin...
by kwerner
Mon Jul 26, 2021 9:42 pm
Forum: WRF Compiling/Installation
Topic: Error compiling WRF-4.3
Replies: 11
Views: 1541

Re: Error compiling WRF-4.3

Hi Yvonne, Have you been able to get this compiled yet? If so, can you try to compile again with the pristine code (i.e., not with the modified file I provided in the last post) to test something for me? We believe this is just a dependency issue and if you can confirm these items for us, we will kn...
by kwerner
Mon Jul 26, 2021 9:36 pm
Forum: WRF Compiling/Installation
Topic: WRF 4.3 compile problems - eclipse?
Replies: 4
Views: 522

Re: WRF 4.3 compile problems - eclipse?

@Dea, Before you do the above step I recommended, can you first issue this command? ls -ls phys/module_ra_eclipse.* to see which files are listed. If you do see the files module_ra_eclipse.o module_ra_eclipse.mod then can you just try to recompile, without issuing a 'clean -a' or reconfiguring? Just...
by kwerner
Wed Jul 21, 2021 8:48 pm
Forum: WRF Compiling/Installation
Topic: WRF 4.3 compile problems - eclipse?
Replies: 4
Views: 522

Re: WRF 4.3 compile problems - eclipse?

Hi Dea, **Please see the newest post below this one prior to completing this step.** I'm not sure why this is failing for certain people. We aren't able to repeat the problem in our group with our machines. If you aren't planning to use the solar eclipse scheme, take a look at the most recent (final...
by kwerner
Wed Jul 21, 2021 8:37 pm
Forum: WRF Code Modification
Topic: WRF performance optimization
Replies: 1
Views: 39

Re: WRF performance optimization

Hi, The WRF code was first written nearly 20 years ago and unfortunately we do not have the resources to do an overhaul on all of the code each time better performance libraries become available. We do not have experience with BLAS or the others you mention and do not know where you would need to mo...
by kwerner
Wed Jul 21, 2021 8:21 pm
Forum: metgrid
Topic: (RESOLVED) ERROR: Error in ext_pkg_write_field in metgrid (WPS v4.0)
Replies: 3
Views: 57

Re: ERROR: Error in ext_pkg_write_field in metgrid (WPS v4.0)

Hi,
This error typically indicates that you're missing some mandatory surface data. Take a look at this FAQ that states the mandatory fields, and make sure you have them for the surface and soil.
by kwerner
Wed Jul 21, 2021 8:19 pm
Forum: WRF Physics
Topic: wind farm parameterization unrealistic results
Replies: 2
Views: 68

Re: wind farm parameterization unrealistic results

This post has been moved to the Physics section of the forum, as this is specific to a physics scheme. Someone will respond to your inquiry soon.
by kwerner
Wed Jul 21, 2021 8:14 pm
Forum: WRF Code Modification
Topic: Outputting Local Variables in Parameterization Scheme to Output Files
Replies: 1
Views: 24

Re: Outputting Local Variables in Parameterization Scheme to Output Files

Hi David, If you haven't already, take a look at this FAQ that gives some generic information on outputting a local variable. Another suggestion is to find a variable that is NOT local and is an output variable in the Kain Fritsch scheme and follow the path through the code to output that variable, ...
by kwerner
Wed Jul 21, 2021 6:58 pm
Forum: geogrid
Topic: Size choice of the first WRF domain
Replies: 2
Views: 63

Re: Size choice of the first WRF domain

Hi Andrea,
Our "rule" is that each domain should be at least 100x100 (e_we and e_sn values). Take a look at this page for best practice suggestions on setting up your domain.
by kwerner
Wed Jul 21, 2021 6:56 pm
Forum: ungrib
Topic: (RESOLVED) Cannot open file './PFILE:2020-09-13_00': Invalid argument
Replies: 7
Views: 801

Re: Cannot open file './PFILE:2020-09-13_00': Invalid argument

That is great news! Thanks you for letting me know.
by kwerner
Mon Jul 12, 2021 8:14 pm
Forum: WRF Compiling/Installation
Topic: Remove Old Installation
Replies: 1
Views: 17

Re: Remove Old Installation

Hi, If you just remove the full WRF directory, that should get rid of the full WRF installation. You can use the command: rm -rf WRF (or whatever the name of your WRF directory is). Alternatively, you can just compile the newer version in its own directory and keep the older one until you make sure ...
by kwerner
Mon Jul 12, 2021 7:59 pm
Forum: Miscellaneous WRF
Topic: output_diagnostics=1, T2MIN and T2MAX incorrect
Replies: 1
Views: 17

Re: output_diagnostics=1, T2MIN and T2MAX incorrect

Hi Shubhi, If you are interested in the code that performs these calculations, you can take a look in phys/module_diag_cl.F. The t2min and t2max variables are called t2clmin and t2clmax in that file. There have been a few changes to the code since V3.9.1, so I'm curious whether using an updated vers...
by kwerner
Thu Jul 08, 2021 8:02 pm
Forum: RIP
Topic: Problem with RIP not calculating trajectories after 99 timesteps
Replies: 5
Views: 875

Re: Problem with RIP not calculating trajectories after 99 timesteps

Kristen, Thank you for that information. It's helpful. I want to let you know we haven't forgotten about this. I've been combing through the code, and have reached out to a "RIP expert" colleague, and neither of us has figured out where that limit is set. According to my colleague, RIP code can be d...
by kwerner
Wed Jul 07, 2021 8:31 pm
Forum: geogrid
Topic: Difference Between LANDUSEF and FRC_URB2D?
Replies: 3
Views: 78

Re: Difference Between LANDUSEF and FRC_URB2D?

Chang,
Yes, I believe that is correct. You could run a short, simple test case to determine if that's correct.
by kwerner
Wed Jul 07, 2021 8:23 pm
Forum: WRF Compiling/Installation
Topic: How to switch compilers
Replies: 1
Views: 22

Re: How to switch compilers

Richard, In order to use an Intel compiler, you will need to have Intel built on your system, and you'll need to set your paths to locate it. If you already have it available, you will simply build the code, choosing the Intel option. If not, you'll need to first obtain an Intel license (which is no...

Go to advanced search