Scheduled Downtime
On Friday 21 April 2023 @ 5pm MT, this website will be down for maintenance and expected to return online the morning of 24 April 2023 at the latest

WRF unable to find netcdf.inc

This post was from a previous version of the WRF&MPAS-A Support Forum. New replies have been disabled and if you have follow up questions related to this post, then please start a new thread from the forum home page.

M

mahmood

New member
I have tried to build the latest git version with netcdf-4.7.0. Although netcdf has been installed, I get this error for wrf.

Code: 
Error : Not found /home/mahmood/06.wrf/netcdf/include/netcdf.inc
        Please check this installation of NetCDF and re-run this configure script
In fact there is no netcdf.inc

Code: 
[mahmood@rocks7 netcdf-c-4.7.0]$ find . -name *.inc
[mahmood@rocks7 netcdf-c-4.7.0]$ cd ../netcdf
[mahmood@rocks7 netcdf]$ find . -name *.inc
[mahmood@rocks7 netcdf]$

I see that this issue has been reported but they say that wrf may use older netcdf version.
So, I want to know which version exactly works?
 
That has the same problem
Code: 
$ find netcdf-c-4.6.3/ -name *.inc
$ ls netcdf/include/
netcdf_aux.h  netcdf_filter.h  netcdf.h  netcdf_mem.h  netcdf_meta.h

The config.log is attached. I think what is written in page 3 of [1] is applicable to older version of netcdf. Any idea?

I chose "serial gcc" which is number 32 and the output of wrf_configure is shown below

Code: 
$ ./configure
checking for perl5... no
checking for perl... found /usr/bin/perl (perl)
Will use NETCDF in dir: /home/mahmood/ChampSim/workloads/06.wrf/netcdf
HDF5 not set in environment. Will configure WRF for use without.
PHDF5 not set in environment. Will configure WRF for use without.
Will use 'time' to report timing information
$JASPERLIB or $JASPERINC not found in environment, configuring to build without grib2 I/O...
------------------------------------------------------------------------
Please select from among the following Linux x86_64 options:

  1. (serial)   2. (smpar)   3. (dmpar)   4. (dm+sm)   PGI (pgf90/gcc)
  5. (serial)   6. (smpar)   7. (dmpar)   8. (dm+sm)   PGI (pgf90/pgcc): SGI MPT
  9. (serial)  10. (smpar)  11. (dmpar)  12. (dm+sm)   PGI (pgf90/gcc): PGI accelerator
 13. (serial)  14. (smpar)  15. (dmpar)  16. (dm+sm)   INTEL (ifort/icc)
                                         17. (dm+sm)   INTEL (ifort/icc): Xeon Phi (MIC architecture)
 18. (serial)  19. (smpar)  20. (dmpar)  21. (dm+sm)   INTEL (ifort/icc): Xeon (SNB with AVX mods)
 22. (serial)  23. (smpar)  24. (dmpar)  25. (dm+sm)   INTEL (ifort/icc): SGI MPT
 26. (serial)  27. (smpar)  28. (dmpar)  29. (dm+sm)   INTEL (ifort/icc): IBM POE
 30. (serial)               31. (dmpar)                PATHSCALE (pathf90/pathcc)
 32. (serial)  33. (smpar)  34. (dmpar)  35. (dm+sm)   GNU (gfortran/gcc)
 36. (serial)  37. (smpar)  38. (dmpar)  39. (dm+sm)   IBM (xlf90_r/cc_r)
 40. (serial)  41. (smpar)  42. (dmpar)  43. (dm+sm)   PGI (ftn/gcc): Cray XC CLE
 44. (serial)  45. (smpar)  46. (dmpar)  47. (dm+sm)   CRAY CCE (ftn $(NOOMP)/cc): Cray XE and XC
 48. (serial)  49. (smpar)  50. (dmpar)  51. (dm+sm)   INTEL (ftn/icc): Cray XC
 52. (serial)  53. (smpar)  54. (dmpar)  55. (dm+sm)   PGI (pgf90/pgcc)
 56. (serial)  57. (smpar)  58. (dmpar)  59. (dm+sm)   PGI (pgf90/gcc): -f90=pgf90
 60. (serial)  61. (smpar)  62. (dmpar)  63. (dm+sm)   PGI (pgf90/pgcc): -f90=pgf90
 64. (serial)  65. (smpar)  66. (dmpar)  67. (dm+sm)   INTEL (ifort/icc): HSW/BDW
 68. (serial)  69. (smpar)  70. (dmpar)  71. (dm+sm)   INTEL (ifort/icc): KNL MIC
 72. (serial)  73. (smpar)  74. (dmpar)  75. (dm+sm)   FUJITSU (frtpx/fccpx): FX10/FX100 SPARC64 IXfx/Xlfx

Enter selection [1-75] : 32
------------------------------------------------------------------------
Compile for nesting? (0=no nesting, 1=basic, 2=preset moves, 3=vortex following) [default 0]:

Configuration successful!
------------------------------------------------------------------------
testing for fseeko and fseeko64
fseeko64 is supported
------------------------------------------------------------------------

# Settings for    Linux x86_64 ppc64le, gfortran compiler with gcc   (serial)
#
DESCRIPTION     =       GNU ($SFC/$SCC)
DMPARALLEL      =       # 1
OMPCPP          =       # -D_OPENMP
OMP             =       # -fopenmp
OMPCC           =       # -fopenmp
SFC             =       gfortran
SCC             =       gcc
CCOMP           =       gcc
DM_FC           =       mpif90 -f90=$(SFC)
DM_CC           =       mpicc -cc=$(SCC)
FC              =       time $(SFC)
CC              =       $(SCC) -DFSEEKO64_OK
LD              =       $(FC)
RWORDSIZE       =       $(NATIVE_RWORDSIZE)
PROMOTION       =       #-fdefault-real-8
ARCH_LOCAL      =       -DNONSTANDARD_SYSTEM_SUBR  -DWRF_USE_CLM
CFLAGS_LOCAL    =       -w -O3 -c
LDFLAGS_LOCAL   =
CPLUSPLUSLIB    =
ESMF_LDFLAG     =       $(CPLUSPLUSLIB)
FCOPTIM         =       -O2 -ftree-vectorize -funroll-loops
FCREDUCEDOPT    =       $(FCOPTIM)
FCNOOPT         =       -O0
FCDEBUG         =       # -g $(FCNOOPT) # -ggdb -fbacktrace -fcheck=bounds,do,mem,pointer -ffpe-trap=invalid,zero,overflow
FORMAT_FIXED    =       -ffixed-form
FORMAT_FREE     =       -ffree-form -ffree-line-length-none
FCSUFFIX        =
BYTESWAPIO      =       -fconvert=big-endian -frecord-marker=4
FCBASEOPTS_NO_G =       -w $(FORMAT_FREE) $(BYTESWAPIO)
FCBASEOPTS      =       $(FCBASEOPTS_NO_G) $(FCDEBUG)
MODULE_SRCH_FLAG =
TRADFLAG        =      -traditional-cpp
CPP             =      /lib/cpp -P -nostdinc
AR              =      ar
ARFLAGS         =      ru
M4              =      m4 -G
RANLIB          =      ranlib
RLFLAGS         =
CC_TOOLS        =      $(SCC)

###########################################################
######################
# POSTAMBLE

FGREP = fgrep -iq

ARCHFLAGS       =    $(COREDEFS) -DIWORDSIZE=$(IWORDSIZE) -DDWORDSIZE=$(DWORDSIZE) -DRWORDSIZE=$(RWORDSIZE) -DLWORDSIZE=$(LWORDSIZE) \
                     $(ARCH_LOCAL) \
                     $(DA_ARCHFLAGS) \
                       \
                       \
                      -DNETCDF \
                       \
                       \
                       \
                       \
                       \
                       \
                       \
                       \
                       -DLANDREAD_STUB=1 \
                       \
                       \
                      -DUSE_ALLOCATABLES \
                      -Dwrfmodel \
                      -DGRIB1 \
                      -DINTIO \
                      -DKEEP_INT_AROUND \
                      -DLIMIT_ARGS \
                      -DBUILD_RRTMG_FAST=1 \
                      -DSHOW_ALL_VARS_USED=0 \
                      -DCONFIG_BUF_LEN=$(CONFIG_BUF_LEN) \
                      -DMAX_DOMAINS_F=$(MAX_DOMAINS) \
                      -DMAX_HISTORY=$(MAX_HISTORY) \
                      -DNMM_NEST=$(WRF_NMM_NEST)
CFLAGS          =    $(CFLAGS_LOCAL)   \
                      -DLANDREAD_STUB=1 \
                      -DMAX_HISTORY=$(MAX_HISTORY) -DNMM_CORE=$(WRF_NMM_CORE)
FCFLAGS         =    $(FCOPTIM) $(FCBASEOPTS)
ESMF_LIB_FLAGS  =
# ESMF 5 -- these are defined in esmf.mk, included above
 ESMF_IO_LIB     =    -L$(WRF_SRC_ROOT_DIR)/external/esmf_time_f90 -lesmf_time
ESMF_IO_LIB_EXT =    -L$(WRF_SRC_ROOT_DIR)/external/esmf_time_f90 -lesmf_time
INCLUDE_MODULES =    $(MODULE_SRCH_FLAG) \
                     $(ESMF_MOD_INC) $(ESMF_LIB_FLAGS) \
                      -I$(WRF_SRC_ROOT_DIR)/main \
                      -I$(WRF_SRC_ROOT_DIR)/external/io_netcdf \
                      -I$(WRF_SRC_ROOT_DIR)/external/io_int \
                      -I$(WRF_SRC_ROOT_DIR)/frame \
                      -I$(WRF_SRC_ROOT_DIR)/share \
                      -I$(WRF_SRC_ROOT_DIR)/phys \
                      -I$(WRF_SRC_ROOT_DIR)/wrftladj \
                      -I$(WRF_SRC_ROOT_DIR)/chem -I$(WRF_SRC_ROOT_DIR)/inc \
                      -I$(NETCDFPATH)/include \

REGISTRY        =    Registry
CC_TOOLS_CFLAGS = -DNMM_CORE=$(WRF_NMM_CORE)

 LIB_BUNDLED     = \
                      $(WRF_SRC_ROOT_DIR)/external/fftpack/fftpack5/libfftpack.a \
                      $(WRF_SRC_ROOT_DIR)/external/io_grib1/libio_grib1.a \
                      $(WRF_SRC_ROOT_DIR)/external/io_grib_share/libio_grib_share.a \
                      $(WRF_SRC_ROOT_DIR)/external/io_int/libwrfio_int.a \
                      $(ESMF_IO_LIB) \
                       \
                      $(WRF_SRC_ROOT_DIR)/frame/module_internal_header_util.o \
                      $(WRF_SRC_ROOT_DIR)/frame/pack_utils.o

 LIB_EXTERNAL    = \
                      -L$(WRF_SRC_ROOT_DIR)/external/io_netcdf -lwrfio_nf -L/home/mahmood/ChampSim/workloads/06.wrf/netcdf/lib  -lnetcdf

LIB             =    $(LIB_BUNDLED) $(LIB_EXTERNAL) $(LIB_LOCAL) $(LIB_WRF_HYDRO)
LDFLAGS         =    $(OMP) $(FCFLAGS) $(LDFLAGS_LOCAL)
ENVCOMPDEFS     =
WRF_CHEM        =       0
CPPFLAGS        =    $(ARCHFLAGS) $(ENVCOMPDEFS) -I$(LIBINCLUDE) $(TRADFLAG)
NETCDFPATH      =    /home/mahmood/ChampSim/workloads/06.wrf/netcdf
HDF5PATH        =
WRFPLUSPATH     =
RTTOVPATH       =
PNETCDFPATH     =

bundled:  io_only
external: io_only gen_comms_serial module_dm_serial $(ESMF_TARGET)
io_only:  esmf_time wrfio_nf   \
          wrf_ioapi_includes wrfio_grib_share wrfio_grib1 wrfio_int fftpack


######################
------------------------------------------------------------------------
Settings listed above are written to configure.wrf.
If you wish to change settings, please edit that file.
If you wish to change the default options, edit the file:
     arch/configure.defaults

Error : Not found /home/mahmood/ChampSim/workloads/06.wrf/netcdf/include/netcdf.inc
        Please check this installation of NetCDF and re-run this configure script

[1] http://www2.mmm.ucar.edu/wrf/users/tutorial/201901/werner_compiling.pdf
 

Attachments

  • config.zip
    16.2 KB · Views: 63
Hi,
Are you trying to compile basic WRF or WRFDA? I know this was originally posted in the WRFDA section, so I want to make sure.

NetCDF V4 is okay to use for either Basic WRF or WRFDA. NetCDF-4 can be built with or without the NetCDF-4 capabilities (like compression). If you're building Basic WRF, you likely don't need those options, and it's okay to turn off the capabilities when building NetCDF. If that's the case, then you should follow the instructions in our WRF Compilation Tutorial. I believe that if you are building WRFDA, you will actually need the additional capabilities, and therefore need the additional libraries, such as HDF5. If you do need those, I'd recommend following this page to guide you through the process of installing NetCDF correctly.
 
IN the first link you posted, if you look at "Building Libraries", item 1, the command for netcdf is said to be

Code: 
./configure --prefix=$DIR/netcdf --disable-dap
     --disable-netcdf-4 --disable-shared
make
make install
I really don't know if netcdf is totally a must or not.
Also, is it mandatory to use --disable-netcdf-4 or not?

After all, during the configuration of WRF, the error is actually related to WRF which is searching for netcdf.inc file.
No matter how netcdf is compiled, there is no such file even in the tar package.
So, I really want to know how people build WRF...
I want to test something with a serial implementation.
 
Please verify that I am building wrf

Code: 
[mahmood@compute-0-4 WRF]$ pwd
/home/mahmood/ChampSim/workloads/06.wrf/WRF
[mahmood@compute-0-4 WRF]$ ls
arch   compile        doc      external  inc          Makefile  README.md  share  var
chem   configure      dyn_em   frame     LICENSE.txt  phys      Registry   test   wrftladj
clean  configure.wrf  dyn_nmm  hydro     main         README    run        tools
[mahmood@compute-0-4 WRF]$ ./configure
checking for perl5... no
checking for perl... found /usr/bin/perl (perl)
Will use NETCDF in dir: /home/mahmood/ChampSim/workloads/06.wrf/netcdf
HDF5 not set in environment. Will configure WRF for use without.
PHDF5 not set in environment. Will configure WRF for use without.
Will use 'time' to report timing information
$JASPERLIB or $JASPERINC not found in environment, configuring to build without grib2 I/O...
------------------------------------------------------------------------
Please select from among the following Linux x86_64 options:

  1. (serial)   2. (smpar)   3. (dmpar)   4. (dm+sm)   PGI (pgf90/gcc)
  5. (serial)   6. (smpar)   7. (dmpar)   8. (dm+sm)   PGI (pgf90/pgcc): SGI MPT
  9. (serial)  10. (smpar)  11. (dmpar)  12. (dm+sm)   PGI (pgf90/gcc): PGI accelerator
 13. (serial)  14. (smpar)  15. (dmpar)  16. (dm+sm)   INTEL (ifort/icc)
                                         17. (dm+sm)   INTEL (ifort/icc): Xeon Phi (MIC architecture)
 18. (serial)  19. (smpar)  20. (dmpar)  21. (dm+sm)   INTEL (ifort/icc): Xeon (SNB with AVX mods)
 22. (serial)  23. (smpar)  24. (dmpar)  25. (dm+sm)   INTEL (ifort/icc): SGI MPT
 26. (serial)  27. (smpar)  28. (dmpar)  29. (dm+sm)   INTEL (ifort/icc): IBM POE
 30. (serial)               31. (dmpar)                PATHSCALE (pathf90/pathcc)
 32. (serial)  33. (smpar)  34. (dmpar)  35. (dm+sm)   GNU (gfortran/gcc)
 36. (serial)  37. (smpar)  38. (dmpar)  39. (dm+sm)   IBM (xlf90_r/cc_r)
 40. (serial)  41. (smpar)  42. (dmpar)  43. (dm+sm)   PGI (ftn/gcc): Cray XC CLE
 44. (serial)  45. (smpar)  46. (dmpar)  47. (dm+sm)   CRAY CCE (ftn $(NOOMP)/cc): Cray XE and XC
 48. (serial)  49. (smpar)  50. (dmpar)  51. (dm+sm)   INTEL (ftn/icc): Cray XC
 52. (serial)  53. (smpar)  54. (dmpar)  55. (dm+sm)   PGI (pgf90/pgcc)
 56. (serial)  57. (smpar)  58. (dmpar)  59. (dm+sm)   PGI (pgf90/gcc): -f90=pgf90
 60. (serial)  61. (smpar)  62. (dmpar)  63. (dm+sm)   PGI (pgf90/pgcc): -f90=pgf90
 64. (serial)  65. (smpar)  66. (dmpar)  67. (dm+sm)   INTEL (ifort/icc): HSW/BDW
 68. (serial)  69. (smpar)  70. (dmpar)  71. (dm+sm)   INTEL (ifort/icc): KNL MIC
 72. (serial)  73. (smpar)  74. (dmpar)  75. (dm+sm)   FUJITSU (frtpx/fccpx): FX10/FX100 SPARC64 IXfx/Xlfx

Enter selection [1-75] : 32
------------------------------------------------------------------------
Compile for nesting? (0=no nesting, 1=basic, 2=preset moves, 3=vortex following) [default 0]:

Configuration successful!
------------------------------------------------------------------------
testing for fseeko and fseeko64
fseeko64 is supported
------------------------------------------------------------------------

# Settings for    Linux x86_64 ppc64le, gfortran compiler with gcc   (serial)
#
DESCRIPTION     =       GNU ($SFC/$SCC)
DMPARALLEL      =       # 1
OMPCPP          =       # -D_OPENMP
OMP             =       # -fopenmp
OMPCC           =       # -fopenmp
SFC             =       gfortran
SCC             =       gcc
CCOMP           =       gcc
DM_FC           =       mpif90 -f90=$(SFC)
DM_CC           =       mpicc -cc=$(SCC)
FC              =       time $(SFC)
CC              =       $(SCC) -DFSEEKO64_OK
LD              =       $(FC)
RWORDSIZE       =       $(NATIVE_RWORDSIZE)
PROMOTION       =       #-fdefault-real-8
ARCH_LOCAL      =       -DNONSTANDARD_SYSTEM_SUBR  -DWRF_USE_CLM
CFLAGS_LOCAL    =       -w -O3 -c
LDFLAGS_LOCAL   =
CPLUSPLUSLIB    =
ESMF_LDFLAG     =       $(CPLUSPLUSLIB)
FCOPTIM         =       -O2 -ftree-vectorize -funroll-loops
FCREDUCEDOPT    =       $(FCOPTIM)
FCNOOPT         =       -O0
FCDEBUG         =       # -g $(FCNOOPT) # -ggdb -fbacktrace -fcheck=bounds,do,mem,pointer -ffpe-trap=invalid,zero,overflow
FORMAT_FIXED    =       -ffixed-form
FORMAT_FREE     =       -ffree-form -ffree-line-length-none
FCSUFFIX        =
BYTESWAPIO      =       -fconvert=big-endian -frecord-marker=4
FCBASEOPTS_NO_G =       -w $(FORMAT_FREE) $(BYTESWAPIO)
FCBASEOPTS      =       $(FCBASEOPTS_NO_G) $(FCDEBUG)
MODULE_SRCH_FLAG =
TRADFLAG        =      -traditional-cpp
CPP             =      /lib/cpp -P -nostdinc
AR              =      ar
ARFLAGS         =      ru
M4              =      m4 -G
RANLIB          =      ranlib
RLFLAGS         =
CC_TOOLS        =      $(SCC)

###########################################################
######################
# POSTAMBLE

FGREP = fgrep -iq

ARCHFLAGS       =    $(COREDEFS) -DIWORDSIZE=$(IWORDSIZE) -DDWORDSIZE=$(DWORDSIZE) -DRWORDSIZE=$(RWORDSIZE) -DLWORDSIZE=$(LWORDSIZE) \
                     $(ARCH_LOCAL) \
                     $(DA_ARCHFLAGS) \
                       \
                       \
                      -DNETCDF \
                       \
                       \
                       \
                       \
                       \
                       \
                       \
                       \
                       -DLANDREAD_STUB=1 \
                       \
                       \
                      -DUSE_ALLOCATABLES \
                      -Dwrfmodel \
                      -DGRIB1 \
                      -DINTIO \
                      -DKEEP_INT_AROUND \
                      -DLIMIT_ARGS \
                      -DBUILD_RRTMG_FAST=1 \
                      -DSHOW_ALL_VARS_USED=0 \
                      -DCONFIG_BUF_LEN=$(CONFIG_BUF_LEN) \
                      -DMAX_DOMAINS_F=$(MAX_DOMAINS) \
                      -DMAX_HISTORY=$(MAX_HISTORY) \
                      -DNMM_NEST=$(WRF_NMM_NEST)
CFLAGS          =    $(CFLAGS_LOCAL)   \
                      -DLANDREAD_STUB=1 \
                      -DMAX_HISTORY=$(MAX_HISTORY) -DNMM_CORE=$(WRF_NMM_CORE)
FCFLAGS         =    $(FCOPTIM) $(FCBASEOPTS)
ESMF_LIB_FLAGS  =
# ESMF 5 -- these are defined in esmf.mk, included above
 ESMF_IO_LIB     =    -L$(WRF_SRC_ROOT_DIR)/external/esmf_time_f90 -lesmf_time
ESMF_IO_LIB_EXT =    -L$(WRF_SRC_ROOT_DIR)/external/esmf_time_f90 -lesmf_time
INCLUDE_MODULES =    $(MODULE_SRCH_FLAG) \
                     $(ESMF_MOD_INC) $(ESMF_LIB_FLAGS) \
                      -I$(WRF_SRC_ROOT_DIR)/main \
                      -I$(WRF_SRC_ROOT_DIR)/external/io_netcdf \
                      -I$(WRF_SRC_ROOT_DIR)/external/io_int \
                      -I$(WRF_SRC_ROOT_DIR)/frame \
                      -I$(WRF_SRC_ROOT_DIR)/share \
                      -I$(WRF_SRC_ROOT_DIR)/phys \
                      -I$(WRF_SRC_ROOT_DIR)/wrftladj \
                      -I$(WRF_SRC_ROOT_DIR)/chem -I$(WRF_SRC_ROOT_DIR)/inc \
                      -I$(NETCDFPATH)/include \

REGISTRY        =    Registry
CC_TOOLS_CFLAGS = -DNMM_CORE=$(WRF_NMM_CORE)

 LIB_BUNDLED     = \
                      $(WRF_SRC_ROOT_DIR)/external/fftpack/fftpack5/libfftpack.a \
                      $(WRF_SRC_ROOT_DIR)/external/io_grib1/libio_grib1.a \
                      $(WRF_SRC_ROOT_DIR)/external/io_grib_share/libio_grib_share.a \
                      $(WRF_SRC_ROOT_DIR)/external/io_int/libwrfio_int.a \
                      $(ESMF_IO_LIB) \
                       \
                      $(WRF_SRC_ROOT_DIR)/frame/module_internal_header_util.o \
                      $(WRF_SRC_ROOT_DIR)/frame/pack_utils.o

 LIB_EXTERNAL    = \
                      -L$(WRF_SRC_ROOT_DIR)/external/io_netcdf -lwrfio_nf -L/home/mahmood/ChampSim/workloads/06.wrf/netcdf/lib  -lnetcdf

LIB             =    $(LIB_BUNDLED) $(LIB_EXTERNAL) $(LIB_LOCAL) $(LIB_WRF_HYDRO)
LDFLAGS         =    $(OMP) $(FCFLAGS) $(LDFLAGS_LOCAL)
ENVCOMPDEFS     =
WRF_CHEM        =       0
CPPFLAGS        =    $(ARCHFLAGS) $(ENVCOMPDEFS) -I$(LIBINCLUDE) $(TRADFLAG)
NETCDFPATH      =    /home/mahmood/ChampSim/workloads/06.wrf/netcdf
HDF5PATH        =
WRFPLUSPATH     =
RTTOVPATH       =
PNETCDFPATH     =

bundled:  io_only
external: io_only gen_comms_serial module_dm_serial $(ESMF_TARGET)
io_only:  esmf_time wrfio_nf   \
          wrf_ioapi_includes wrfio_grib_share wrfio_grib1 wrfio_int fftpack


######################
------------------------------------------------------------------------
Settings listed above are written to configure.wrf.
If you wish to change settings, please edit that file.
If you wish to change the default options, edit the file:
     arch/configure.defaults

Error : Not found /home/mahmood/ChampSim/workloads/06.wrf/netcdf/include/netcdf.inc
        Please check this installation of NetCDF and re-run this configure script
[mahmood@compute-0-4 WRF]$
 
Hi,
As I mentioned above, if you are planning to compile WRFDA, then you should NOT disable netcdf-4, but if you are not building WRFDA, then you very likely do NOT need the netcdf-4 capabilities, and therefore it should be just fine to use the full command (including the disable netcdf-4 part):
./configure --prefix=$DIR/netcdf --disable-dap --disable-netcdf-4 --disable-shared

Have you gone through the full compilation tutorial web page, starting at the beginning, to first verify that your environment is set-up correctly and that your compilers are compatible? If not, you should do that and make sure you pass all the tests. Then, if you are not installing WRFDA, and are only planning to install Basic WRF, follow the instructions to build the appropriate libraries, and make sure to set your paths. You should also set the paths in your environment script (e.g., .cshrc, or .bash) so that the paths remain set even after you close your terminal window. When you install netcdf, make sure that the installation is successful. If it's not, and/or if you are still getting the error regarding the netcdf.inc file, you will need to discuss the problem with a systems administrator at your institute. We can provide guidance for installing the libraries (which is what we have done with the compilation tutorial web page), but we do not develop or support the libraries, so if you are having trouble getting those installed correctly, we are unfortunately unable to help.
 
Perhaps the netcdf-Fortran part was not installed, or installed in a different directory.

As stated in this web page:
Building the NetCDF-4.2 and later Fortran libraries
In versions before 4.2, the Fortran netCDF library source was bundled with the C library source in one distribution. With more recent versions, the Fortran netCDF library has been split off into an independent source distribution, intended to be built as a separate library, after the C library is built and installed.
Click to expand...
 
You must log in or register to reply here.
Top