Domains with 1:1 grid ratio cause segfault?

Topics specifically related to the wrf.exe program
Post Reply
emtarouilly
Posts: 1
Joined: Sat May 08, 2021 1:31 am

Domains with 1:1 grid ratio cause segfault?

Post by emtarouilly » Sat May 08, 2021 1:53 am

Hi,

I have been trying to run WRF using 3 nested domains at 15-3-3 km resolution (see map), i.e. the second and third nest have the same resolution. This is because I need to be able to make modifications to the output of the second domain, and then run the third domain using ndown. But before doing that with ndown, I tried just running all 3 domains at once (as normally done when not using ndown).

WRF crashes almost immediately with a segfault (see the rsl.error.0000 file attached). WPS and real seemed to run ok and produce the appropriate files.

I have tried steps that would typically help with segfault:
- Reduce the time step (down to 1 second, which seems very small)
- Increase epssm and use 6th order diffusion
- Move the innermost domain away from mountainous terrain

Is it not ok to have 2 domains at the same resolution? Or am I making a mistake elsewhere?
Attachments
rsl.error.0000.txt
(7.27 KiB) Downloaded 3 times
namelist.input
(4.27 KiB) Downloaded 3 times
domains.png

Ming Chen
Posts: 1456
Joined: Mon Apr 23, 2018 9:42 pm

Re: Domains with 1:1 grid ratio cause segfault?

Post by Ming Chen » Wed May 12, 2021 10:51 pm

I believe this is because your D03 is not really a 'nested' domain. It is just a sub-region of D02 and the model is get confused how to process this domain.
I would suggest you run two-domain nesting, and you can always extract the data over the "D03" from model out for D02, i.e.,

ix = 174, 174+165
iy = 165, 165+ 265

Results of D02 over the above range are exactly what you want for D03.
WRF Help Desk

Post Reply

Return to “wrf.exe”