unable to run WRF.exe through gis4wrfiles of QGIS

Hello Everyone,
My error like this when running WRF from gis4wrf and check the error from rsl.error.0001 and it output like this as below.
taskid: 1 hostname: wind
/root/src/WRF/frame/module_io_quilt_old.F 2933 F
Quilting with 1 groups of 0 I/O tasks.
Ntasks in X 1 , ntasks in Y 2
*************************************
Configuring physics suite 'conus'

mp_physics: 0* 0*
cu_physics: 0* 0*
ra_lw_physics: 4 4
ra_sw_physics: 4 4
bl_pbl_physics: 2 2
sf_sfclay_physics: 2 2
sf_surface_physics: 2 2

(* = option overrides suite setting)
*************************************
WRF V4.0 MODEL
*************************************
Parent domain
ids,ide,jds,jde 1 31 1 31
ims,ime,jms,jme -4 36 9 36
ips,ipe,jps,jpe 1 31 16 31
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1 , 43059672 bytes allocated
med_initialdata_input: calling input_input
Input data is acceptable to use:
Max map factor in domain 1 = 1.33. Scale the dt in the model accordingly.
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
*************************************
Nesting domain
ids,ide,jds,jde 1 31 1 31
ims,ime,jms,jme -4 36 6 36
ips,ipe,jps,jpe 1 31 16 31
INTERMEDIATE domain
ids,ide,jds,jde 9 24 9 24
ims,ime,jms,jme 4 29 6 29
ips,ipe,jps,jpe 7 26 16 26
*************************************
d01 2020-10-01_00:00:00 alloc_space_field: domain 2 , 5785728 bytes allocated
d01 2020-10-01_00:00:00 alloc_space_field: domain 2 , 47496792 bytes allocated
d01 2020-10-01_00:00:00 *** Initializing nest domain # 2 from an input file. ***
d01 2020-10-01_00:00:00 med_initialdata_input: calling input_input
d01 2020-10-01_00:00:00 Input data is acceptable to use:
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
Max map factor in domain 1 = 1.33. Scale the dt in the model accordingly.
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
d01 2020-10-01_00:00:00 Input data is acceptable to use:
Tile Strategy is not specified. Assuming 1D-Y
WRF TILE 1 IS 1 IE 31 JS 16 JE 31
WRF NUMBER OF TILES = 1
d01 2020-10-01_00:00:00 5393 points exceeded cfl=2 in domain d01 at time 2020-10-01_00:00:00 hours
d01 2020-10-01_00:00:00 MAX AT i,j,k: 5 20 9 vert_cfl,w,d(eta)= 84884.883 -37258404. 3.17344069E-02
Tile Strategy is not specified. Assuming 1D-Y
WRF TILE 1 IS 1 IE 31 JS 16 JE 31
WRF NUMBER OF TILES = 1
d02 2020-10-01_00:00:00 32 points exceeded cfl=2 in domain d02 at time 2020-10-01_00:00:00 hours
d02 2020-10-01_00:00:00 MAX AT i,j,k: 11 20 2 vert_cfl,w,d(eta)= 10.968848 445.83459 7.86405802E-03

Program received signal 11 (SIGSEGV): Segmentation fault.

Backtrace for this error:
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/.libs/libgfortran-ed201abd.so.3.0.0(+0x13f59) [0x7fdb6a3c0f59]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/.libs/libgfortran-ed201abd.so.3.0.0(+0x1584e) [0x7fdb6a3c284e]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/.libs/libgfortran-ed201abd.so.3.0.0(+0x146aa) [0x7fdb6a3c16aa]
+ /lib/x86_64-linux-gnu/libc.so.6(+0x3f040) [0x7fdb69a45040]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0x1a3b7c9]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0x1a56c69]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0x1a6ae51]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0x1a7a5af]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0x14049dc]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0x1160fea]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0x1059ebf]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0xfb294a]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0xed91be]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0x40e3ba]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0x40d5af]
+ /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe7) [0x7fdb69a27bf7]
+ /home/sam/gis4wrf/dist/WRF-4.0-mpi/main/wrf.exe() [0x40d5e9]

What should I do next?
Thanks,
Sam