Scheduled Downtime
On Friday 21 April 2023 @ 5pm MT, this website will be down for maintenance and expected to return online the morning of 24 April 2023 at the latest

emitted longwave <0; skin T may be wrong due to inconsistent input of SHDFAC with LAI

This post was from a previous version of the WRF&MPAS-A Support Forum. New replies have been disabled and if you have follow up questions related to this post, then please start a new thread from the forum home page.

figurski

New member
Dear all,

I am using dwscaling WRF 4.2.2 dynamic scaling with a horizontal resolution of 12.5, 2.5 and 0.5 km. Preliminary data are from a GFS 0.25 deg model. I have been using the same parameterization for several months and for several days I have received the error that was already described earlier.

https://forum.mmm.ucar.edu/phpBB3/viewtopic.php?t=9661

In my case it is similar, after a few minutes of work, the model ends with the following message:

emitted longwave <0; skin T may be wrong due to inconsistent
input of SHDFAC with LAI
116 44 SHDFAC= 0.5681409 VAI= 4.333785 TV=
285.6632 TG= 274.1017
LWDN= 199.5439 FIRA= -236.5735 SNOWH= 0.0000000E+00
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 2096
STOP in Noah-MP
-------------------------------------------

In the previous post, the problem was solved by disabling the adaptive time step. In my simulations, I do not use the adaptive time step, so the problem is still open.
Please let me know how this problem can be solved.

My namelist.input

&physics
mp_physics = 6, 6, 6, 6,
ra_lw_physics = 24, 24, 24, 24,
ra_sw_physics = 24, 24, 24, 24,
radt = 10, 10, 10, 10,
slope_rad = 1, 1, 1, 1,
topo_shading = 1, 1, 1, 1,
sf_sfclay_physics = 91, 91, 91, 91,
sf_surface_physics = 4, 4, 4, 4,
bl_pbl_physics = 7, 7, 7, 7,
bldt = 0, 0, 0, 0,
cu_physics = 14, 0, 0, 0,
cudt = 0, 0, 0, 0,
sf_lake_physics = 0, 0, 0, 0,
lakedepth_default = 50., 50., 50., 50., 50.,
lake_min_elev = 5., 5., 5., 5., 5.,
use_lakedepth = 1,
do_radar_ref = 1,
sst_skin = 0,
swint_opt = 2,
mp_zero_out = 0,
sst_update = 1,
levsiz = 59,
paerlev = 29,
cam_abs_dim1 = 4,
cam_abs_dim2 = 40,
isfflx = 1,
ifsnow = 0,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
num_land_cat = 21,
sf_urban_physics = 0, 0, 0, 0,
!num_urban_layers = 400,
maxiens = 1,
maxens = 3,
maxens2 = 3,
maxens3 = 16,
ensdim = 144,
cu_rad_feedback = .true., .false., .false., .false.,
cu_diag = 0, 0, 0, 0,
hail_opt = 0,
hailcast_opt = 0, 1, 0, 0,
haildt = 10,
prec_acc_dt = 60, 60, 60, 60,
bl_mynn_tkeadvect = .false., .false., .false., .false.,
bl_mynn_tkebudget = 0, 0, 0, 0,
/

&noah_mp
opt_snf = 4,
/

&dynamics
w_damping = 1,
diff_opt = 1, 1, 1, 1,
km_opt = 4, 4, 4, 4,
diff_6th_opt = 0, 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12, 0.12,
base_temp = 290,
epssm = 0.3,
damp_opt = 0,
zdamp = 5000.0, 5000.0, 5000.0, 5000.0,
dampcoef = 0.2, 0.2, 0.2, 0.2,
khdif = 0, 0, 0, 0, 0,
kvdif = 0, 0, 0, 0, 0,
non_hydrostatic = .true., .true., .true., .true., .true.,
moist_adv_opt = 1, 1, 1, 1, 1,
scalar_adv_opt = 1, 1, 1, 1, 1,
/



Best regards
Mariusz
 
This post has been moved to the physics section, as the error you are receiving is specific to WRF physics. Someone will respond to your inquiry soon.
 
Top