Run wrf.exe error when using surface analysis nudging - solved

Trouble description:
I met with a problem when I ran WRF with surface analysis nudging.
I successfully created met_em* files by WPS. And then I successfully got metoa_em* files and wrfsfdda files by running obsgrid.exe. After that, real.exe is also run successfully. However, when I ran wrf.exe, the problem occurred and it seemed that wrf.exe stopped while initializing nest domain 3.
Here is a part of message in rsl.error files.

d02 2015-08-19_12:00:00 alloc_space_field: domain 3 , 7252128 bytes allocated
d02 2015-08-19_12:00:00 alloc_space_field: domain 3 , 40721948 bytes allocated
d02 2015-08-19_12:00:00 *** Initializing nest domain # 3 from an input file. ***
d02 2015-08-19_12:00:00 med_initialdata_input: calling input_input
d02 2015-08-19_12:00:00 Input data is acceptable to use:
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
d02 2015-08-19_12:00:00 Yes, this special data is acceptable to use: SFCFDDA FILE: SURFACE ANALYSES FOR NUDGING
d02 2015-08-19_12:00:00 Input data is acceptable to use:
d02 2015-08-19_12:00:00 Input data processed for aux input 9 for domain 2
d02 2015-08-19_12:00:00 Input data is acceptable to use:
d02 2015-08-19_12:00:00 Input data processed for aux input 10 for domain 2
Tile Strategy is not specified. Assuming 1D-Y
WRF TILE 1 IS 71 IE 85 JS 48 JE 62
WRF NUMBER OF TILES = 1
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 1076
In grid FDDA
-------------------------------------------
Abort(1) on node 23 (rank 23 in comm 0): application called MPI_Abort(MPI_COMM_WORLD, 1) - process 23


I found this problem using the command, grep -i 'fatal' rsl.* . The results are shown as below:

rsl.error.0023:-------------- FATAL CALLED ---------------
rsl.error.0023:FATAL CALLED FROM FILE: <stdin> LINE: 1076
rsl.error.0028:-------------- FATAL CALLED ---------------
rsl.error.0028:FATAL CALLED FROM FILE: <stdin> LINE: 1076
rsl.error.0029:-------------- FATAL CALLED ---------------
rsl.error.0029:FATAL CALLED FROM FILE: <stdin> LINE: 1076
rsl.error.0034:-------------- FATAL CALLED ---------------
rsl.error.0034:FATAL CALLED FROM FILE: <stdin> LINE: 1076
rsl.error.0035:-------------- FATAL CALLED ---------------
rsl.error.0035:FATAL CALLED FROM FILE: <stdin> LINE: 1076
rsl.out.0023:-------------- FATAL CALLED ---------------
rsl.out.0023:FATAL CALLED FROM FILE: <stdin> LINE: 1076
rsl.out.0028:-------------- FATAL CALLED ---------------
rsl.out.0028:FATAL CALLED FROM FILE: <stdin> LINE: 1076
rsl.out.0029:-------------- FATAL CALLED ---------------
rsl.out.0029:FATAL CALLED FROM FILE: <stdin> LINE: 1076
rsl.out.0034:-------------- FATAL CALLED ---------------
rsl.out.0034:FATAL CALLED FROM FILE: <stdin> LINE: 1076
rsl.out.0035:-------------- FATAL CALLED ---------------
rsl.out.0035:FATAL CALLED FROM FILE: <stdin> LINE: 1076

The &fdda section in the namelist.input is shown below:

&fdda
grid_fdda = 1, 1, 0,
gfdda_inname = "wrffdda_d<domain>",
gfdda_end_h = 162, 162, 0,
gfdda_interval_m = 360, 360, 0,
fgdt = 0, 0, 0,
if_no_pbl_nudging_uv = 0, 0, 0,
if_no_pbl_nudging_t = 1, 1, 1,
if_no_pbl_nudging_q = 1, 1, 1,
if_zfac_uv = 0, 0, 0,
k_zfac_uv = 10, 10, 10,
if_zfac_t = 0, 0, 0,
k_zfac_t = 10, 10, 10,
if_zfac_q = 0, 0, 0,
k_zfac_q = 10, 10, 10,
guv = 0.0003, 0.0003, 0.0003,
gt = 0.0003, 0.0003, 0.0003,
gq = 0.0003, 0.0003, 0.0003,
if_ramping = 1,
dtramp_min = 60.0,
io_form_gfdda = 2,
grid_sfdda = 1, 1, 0,
sgfdda_inname = "wrfsfdda_d<domain>",
sgfdda_end_h = 162, 162, 0,
sgfdda_interval_m = 180, 180, 0,
io_form_sgfdda = 2,
guv_sfc = 0.0003, 0.0003, 0.0003,
gt_sfc = 0.0003, 0.0003, 0.0003,
gq_sfc = 0.0003, 0.0003, 0.0003,
rinblw = 250.,
/

The attachment contains namelist, rsl.error and rsl.out.

Solution:
The description about rinblw in Registry/Registry.EM_COMMON is :
The "max_domains" means we should set rinblw for each domain.
So set the rinblw like this:
The wrf.exe can run successfully.

Version information:
WRF v4.2
WPS v4.2
OBSGRID v3.7
netcdf-c-4.7.3
netcdf-fortran-4.5.2
ioapi-3.2
jasper-2.0.14
libpng-1.6.37
zlib-1.2.11
Intel 19.1

p.s. thanks Dave and the admin for helping me solve the wrf running problem and the trouble posting in the forum.