LANDUSE.TBL

[vanessalmeida24]

Morning... When running wrf.exe the error file is generated below. Anyone with similar issue resolved?

Thanks!!!!


Quilting with 1 groups of 0 I/O tasks.
Ntasks in X 1 , ntasks in Y 1
Domain # 1: dx = 6000.000 m
Domain # 2: dx = 3000.000 m
Domain # 3: dx = 2000.000 m
WRF V4.3.3 MODEL
No git found or not a git repository, git commit version not available.
*************************************
Parent domain
ids,ide,jds,jde 1 200 1 140
ims,ime,jms,jme -4 205 -4 145
ips,ipe,jps,jpe 1 200 1 140
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1 , 1077592880 bytes allocated
med_initialdata_input: calling input_input
Input data is acceptable to use: wrfinput_d01
CURRENT DATE = 2022-01-01_00:00:00
SIMULATION START DATE = 2022-01-01_00:00:00
Timing for processing wrfinput file (stream 0) for domain 1: 0.32340 elapsed seconds
Max map factor in domain 1 = 1.20. Scale the dt in the model accordingly.
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 1695
module_physics_init.F: LANDUSE_INIT: open failure for LANDUSE.TBL

 

[vanessalmeida24]

Completing the previous post, in the run folder there is the complete LANDUSE.TBL file but even so the wrf does not find it.

 

[kwerner]

Hi,
Are you running this in the run/ directory, or in test/em_real? If in the latter, just simply copy that file over to the test/em_real directory.

 

[vanessalmeida24]

Hi,
Are you running this in the run/ directory, or in test/em_real? If in the latter, just simply copy that file over to the test/em_real directory.

I'm running in the run directory

 

[kwerner]

@vanessalmeida24
Can you go to the run/ directory and issue the following:

ls -ls >& ls.log

and attach that ls.log file, as well as your namelist.input file and your wrf.exe error log file(s)? Thanks!

 

[vanessalmeida24]

@vanessalmeida24
Can you go to the run/ directory and issue the following:

ls -ls >& ls.log

and attach that ls.log file, as well as your namelist.input file and your wrf.exe error log file(s)? Thanks!

 

[kwerner]

The ls.log file you sent does not show the files that should be present in the WRF/run directory. When I do an 'ls' in my run directory, this is what I get.

cheyenne:wrfv4.4.2/run>ls
aerosol.formatted                 CLM_ALB_ICE_DFS_DATA              gribmap.txt                                README.tslist
aerosol_lat.formatted             CLM_ALB_ICE_DRC_DATA              HLC.TBL                                    real.exe
aerosol_lon.formatted             CLM_ASM_ICE_DFS_DATA              ishmael-gamma-tab.bin                      RRTM_DATA
aerosol_plev.formatted            CLM_ASM_ICE_DRC_DATA              ishmael-qi-qc.bin                          RRTM_DATA_DBL
BROADBAND_CLOUD_GODDARD.bin       CLM_DRDSDT0_DATA                  ishmael-qi-qr.bin                          RRTMG_LW_DATA
bulkdens.asc_s_0_03_0_9           CLM_EXT_ICE_DFS_DATA              kernels.asc_s_0_03_0_9                     RRTMG_LW_DATA_DBL
bulkradii.asc_s_0_03_0_9          CLM_EXT_ICE_DRC_DATA              kernels_z.asc                              RRTMG_SW_DATA
CAM_ABS_DATA                      CLM_KAPPA_DATA                    LANDUSE.TBL                                RRTMG_SW_DATA_DBL
CAM_AEROPT_DATA                   CLM_TAU_DATA                      masses.asc                                 SOILPARM.TBL
CAMtr_volume_mixing_ratio         co2_trans                         MPTABLE.TBL                                SOILPARM.TBL_Kishne_2017
CAMtr_volume_mixing_ratio.A1B     coeff_p.asc                       namelist.input                             STOCHPERT.TBL
CAMtr_volume_mixing_ratio.A2      coeff_q.asc                       namelist.input.backup.2023-03-17_11_02_17  tc.exe
CAMtr_volume_mixing_ratio.RCP4.5  constants.asc                     ndown.exe                                  termvels.asc
CAMtr_volume_mixing_ratio.RCP6    create_p3_lookupTable_1.f90-v5.4  ozone.formatted                            tr49t67
CAMtr_volume_mixing_ratio.RCP8.5  create_p3_lookupTable_2.f90-v5.3  ozone_lat.formatted                        tr49t85
CAMtr_volume_mixing_ratio.SSP119  eclipse_besselian_elements.dat    ozone_plev.formatted                       tr67t85
CAMtr_volume_mixing_ratio.SSP126  ETAMPNEW_DATA                     p3_lookupTable_1.dat-v5.4_2momI            URBPARM_LCZ.TBL
CAMtr_volume_mixing_ratio.SSP245  ETAMPNEW_DATA_DBL                 p3_lookupTable_1.dat-v5.4_3momI            URBPARM.TBL
CAMtr_volume_mixing_ratio.SSP370  ETAMPNEW_DATA.expanded_rain       p3_lookupTable_2.dat-v5.3                  URBPARM_UZE.TBL
CAMtr_volume_mixing_ratio.SSP585  ETAMPNEW_DATA.expanded_rain_DBL   README.namelist                            VEGPARM.TBL
capacity.asc                      GENPARM.TBL                       README.physics_files                       wind-turbine-1.tbl
CCN_ACTIVATE.BIN                  grib2map.tbl                      README.rasm_diag                           wrf.exe

I see that you've got a "run-wrf.sh" script in there, though. Does that script point to a different directory? If so, can you attach that script, and do the same 'ls -ls' command in the directory where that script points to run the wrf executable?