Maintain steady upwind boundary condition

Topics related to running an idealized case
Post Reply
foret37
Posts: 1
Joined: Tue Apr 20, 2021 1:06 am

Maintain steady upwind boundary condition

Post by foret37 » Tue Apr 20, 2021 1:23 am

We are using the ideal case, em_hill2d. Our objective is to maintain a steady upwind atmosphere, as defined by the initial condition file, and to allow that atmosphere to advect over the downwind topography. We have completed about 15 runs now with wrf 4.1, but it seems that the upwind condition at xStart changes with time. I have searched through the documentation and also all relevant information on the web, and there is no detailed discussion about the role of the initial condition and the specifics for the lateral boundary conditions for the ideal calculation. My guess is that it should be possible to set up this simple experiment, but I have yet see how to make it work.
Best,
Mark

kwerner
Posts: 2287
Joined: Wed Feb 14, 2018 9:21 pm

Re: Maintain steady upwind boundary condition

Post by kwerner » Wed Apr 21, 2021 9:17 pm

Hi Mark,
I'm not all that versed on the idealized cases and how to tinker with them, but I'm just curious what you've tried. It looks like the boundary conditions turned on by default for hill2d are "open" at both the x_start and x_end sides, and then periodic in the y-direction. If you set open_xs to .false. does that make a difference?
NCAR/MMM

Post Reply

Return to “Idealized Cases”