WRF-Chem4.0 or later Error running wrf.exe

Post Reply
qinch18
Posts: 6
Joined: Tue May 04, 2021 12:06 pm

WRF-Chem4.0 or later Error running wrf.exe

Post by qinch18 » Tue May 04, 2021 3:01 pm

Hello
There is a problem when I am running WRF-CHEM4.0 or later, Some of the solutions on the forums have been used but to no avail, anthropogenic source is generated by anthro_emiss.
Intel 19, NETCDF4.7.3 ,hdf5-1.10.5

setenv CC icc
setenv CXX icpc
setenv FC ifort
setenv F77 ifort
setenv F90 ifort
setenv CPPFLAGS "-qopenmp -DNDEBUG -DpgiFortran"
setenv CFLAGS "-qopenmp -g -O"
setenv FFLAGS "-qopenmp -O2 -mp -recursive"
Attachments
rsl.error.0000.txt
(74.5 KiB) Downloaded 5 times

jordanschnell
Posts: 141
Joined: Thu Feb 27, 2020 10:58 pm

Re: WRF-Chem4.0 or later Error running wrf.exe

Post by jordanschnell » Wed May 05, 2021 5:48 pm

Hi,

Note this warning in your logfile:

WARNING: SAPRC99_MOSAIC_4BIN_VBS2_4BIN chemistry option is highly experimental and not recommended for use.

Sometimes an error message will show up in the offending core, do any of your other rsl.out/errors show anything else before the segmentation fault?

Can you successfully run with later versions?

Jordan

qinch18
Posts: 6
Joined: Tue May 04, 2021 12:06 pm

Re: WRF-Chem4.0 or later Error running wrf.exe

Post by qinch18 » Thu May 06, 2021 12:21 am

I have also tried to run 4.1 which is still the problem above. WRF-CHEM3.6.1 also has the "WARNING:SAPRC99_MOSAIC_4BIN_VBS2_4BIN chemistry option is highly experimental and not recommended for use ",But it works.

qinch18
Posts: 6
Joined: Tue May 04, 2021 12:06 pm

Re: WRF-Chem4.0 or later Error running wrf.exe

Post by qinch18 » Thu May 06, 2021 1:32 am

I have also tried to run 4.2 which is still the problem above.
Error trying to read metadata

jordanschnell
Posts: 141
Joined: Thu Feb 27, 2020 10:58 pm

Re: WRF-Chem4.0 or later Error running wrf.exe

Post by jordanschnell » Thu May 06, 2021 7:56 pm

I assume the anthro_emiss executable is from v4.0?

qinch18
Posts: 6
Joined: Tue May 04, 2021 12:06 pm

Re: WRF-Chem4.0 or later Error running wrf.exe

Post by qinch18 » Fri May 07, 2021 4:59 am

THANK YOU, I downloaded anthro_emiss from the following URL (https://www.acom.ucar.edu/wrf-chem/download.shtml)and run WRF-chem3.6.1 with this.Below is the namelist. Input
Attachments
namelist.input
(8.98 KiB) Downloaded 3 times

qinch18
Posts: 6
Joined: Tue May 04, 2021 12:06 pm

Re: WRF-Chem4.0 or later Error running wrf.exe

Post by qinch18 » Sat May 08, 2021 1:20 am

Hello,
These are some of the problems I encountered while installing and running WRF-CHEM4.1.
Attachments
configure.wrf
(23.15 KiB) Downloaded 3 times
rsl.rar
(34.99 KiB) Downloaded 4 times
compile1.log
(67.21 KiB) Downloaded 3 times
compile.log
(1.94 MiB) Downloaded 4 times
namelist.input
(8.98 KiB) Downloaded 3 times

Post Reply

Return to “Running”