<r>when I change source code to output the data of the source of qsnow ,everything goes fine .<br/>
the data has been written into wrfout file . I can draw the source of qsnow<br/>
when I change code to output the source of qice ,qcloud,qhail,qgraupel just like qsnow, everything goes fine ,too<br/>
./compile and ./real.exe are successful<br/>
however , ./wrf.exe has come to wrong .<br/>
<br/>
<br/>
rsl.error.0000 shows that<br/>
D01 3-D analysis nudging for wind is applied and Guv= 0.3000E-03<br/>
D01 3-D analysis nudging for temperature is applied and Gt= 0.3000E-03<br/>
D01 3-D analysis nudging for water vapor mixing ratio is applied and Gq= 0.3000E-03<br/>
D01 3-D analysis nudging for temperature is turned off within the PBL.<br/>
D01 3-D analysis nudging for water vapor mixing ratio is turned off within the PBL.<br/>
D01 surface analysis nudging for wind is applied and Guv_sfc= 0.3000E-03<br/>
D01 surface analysis nudging for temperature is applied and Gt_sfc= 0.3000E-03<br/>
D01 surface analysis nudging for water vapor mixing ratio is applied and Gq_sfc= 0..3000E-03<br/>
open_hist_w :<COLOR color="#BF0000"><s></s> error <e></e></COLOR>opening wrfout_d01_2017-06-07_00:00:00 for writing. ***\<br/>
Timing for Writing wrfout_d01_2017-06-07_00:00:00 for domain 1: 17.35052 elapsed seconds<br/>
d01 2017-06-07_00:00:00 Input data processed for aux input 9 for domain 1<br/>
d01 2017-06-07_00:00:00 Input data processed for aux input 10 for domain 1<br/>
Timing for processing lateral boundary for domain 1: 0.82887 elapsed seconds<br/>
Tile Strategy is not specified. Assuming 1D-Y<br/>
WRF TILE 1 IS 1 IE 69 JS 1 JE 40<br/>
WRF NUMBER OF TILES = 1<br/>
D01 3-D analysis nudging reads new data at time = 0.000 min.<br/>
D01 3-D analysis nudging bracketing times = 0.00 360.00 min.<br/>
D01 surface analysis nudging reads new data at time = 0.000 min.<br/>
D01 surface analysis nudging bracketing times = 0.00 360.00 min.<br/>
open_hist_w : <COLOR color="#BF0000"><s></s>error<e></e></COLOR> opening wrfout_d02_2017-06-07_00:00:00 for writing. ***<br/>
Timing for Writing wrfout_d02_2017-06-07_00:00:00 for domain 2: 17.05588 elapsed seconds<br/>
Tile Strategy is not specified. Assuming 1D-Y<br/>
WRF TILE 1 IS 1 IE 69 JS 1 JE 40<br/>
WRF NUMBER OF TILES = 1<br/>
<br/>
<br/>
why the wrfout cannot be written?<br/>
<br/>
the place where the code I changed has note "edit"
<ATTACHMENT filename="Registry.EM_COMMON.txt" index="0"><s></e></ATTACHMENT><ATTACHMENT filename="solve_em.F" index="1"><s>View attachment 1</e></ATTACHMENT><ATTACHMENT filename="module_mp_milbrandt2mom.F" index="2"><s>View attachment 2</e></ATTACHMENT><ATTACHMENT filename="module_microphysics_driver.F" index="3"><s>View attachment 3</e></ATTACHMENT></r>
the data has been written into wrfout file . I can draw the source of qsnow<br/>
when I change code to output the source of qice ,qcloud,qhail,qgraupel just like qsnow, everything goes fine ,too<br/>
./compile and ./real.exe are successful<br/>
however , ./wrf.exe has come to wrong .<br/>
<br/>
<br/>
rsl.error.0000 shows that<br/>
D01 3-D analysis nudging for wind is applied and Guv= 0.3000E-03<br/>
D01 3-D analysis nudging for temperature is applied and Gt= 0.3000E-03<br/>
D01 3-D analysis nudging for water vapor mixing ratio is applied and Gq= 0.3000E-03<br/>
D01 3-D analysis nudging for temperature is turned off within the PBL.<br/>
D01 3-D analysis nudging for water vapor mixing ratio is turned off within the PBL.<br/>
D01 surface analysis nudging for wind is applied and Guv_sfc= 0.3000E-03<br/>
D01 surface analysis nudging for temperature is applied and Gt_sfc= 0.3000E-03<br/>
D01 surface analysis nudging for water vapor mixing ratio is applied and Gq_sfc= 0..3000E-03<br/>
open_hist_w :<COLOR color="#BF0000"><s></s> error <e></e></COLOR>opening wrfout_d01_2017-06-07_00:00:00 for writing. ***\<br/>
Timing for Writing wrfout_d01_2017-06-07_00:00:00 for domain 1: 17.35052 elapsed seconds<br/>
d01 2017-06-07_00:00:00 Input data processed for aux input 9 for domain 1<br/>
d01 2017-06-07_00:00:00 Input data processed for aux input 10 for domain 1<br/>
Timing for processing lateral boundary for domain 1: 0.82887 elapsed seconds<br/>
Tile Strategy is not specified. Assuming 1D-Y<br/>
WRF TILE 1 IS 1 IE 69 JS 1 JE 40<br/>
WRF NUMBER OF TILES = 1<br/>
D01 3-D analysis nudging reads new data at time = 0.000 min.<br/>
D01 3-D analysis nudging bracketing times = 0.00 360.00 min.<br/>
D01 surface analysis nudging reads new data at time = 0.000 min.<br/>
D01 surface analysis nudging bracketing times = 0.00 360.00 min.<br/>
open_hist_w : <COLOR color="#BF0000"><s></s>error<e></e></COLOR> opening wrfout_d02_2017-06-07_00:00:00 for writing. ***<br/>
Timing for Writing wrfout_d02_2017-06-07_00:00:00 for domain 2: 17.05588 elapsed seconds<br/>
Tile Strategy is not specified. Assuming 1D-Y<br/>
WRF TILE 1 IS 1 IE 69 JS 1 JE 40<br/>
WRF NUMBER OF TILES = 1<br/>
<br/>
<br/>
why the wrfout cannot be written?<br/>
<br/>
the place where the code I changed has note "edit"
<ATTACHMENT filename="Registry.EM_COMMON.txt" index="0"><s></e></ATTACHMENT><ATTACHMENT filename="solve_em.F" index="1"><s>View attachment 1</e></ATTACHMENT><ATTACHMENT filename="module_mp_milbrandt2mom.F" index="2"><s>View attachment 2</e></ATTACHMENT><ATTACHMENT filename="module_microphysics_driver.F" index="3"><s>View attachment 3</e></ATTACHMENT></r>