kballesteros
New member
Hi everyone,
I have been working with WRF-Chem for quite some time now, but only recently started using it to simulate transport and transformation of Biomass Burning emissions, and would like to ask you a question.
Our set-up is MOZART-MOSAIC 4BIN. We are including BB emissions from the FINN emission inventory. However, it seems that the MOZART-MOSAIC options are not setup to work with the online plumerise. Only gas phase BB emissions are being mapped to the chemistry after the plume rise calculation.
- The question is.... is there an "easy" way to include also the primary OC and EC from BB into the MOSAIC scheme?
Or alternatively...
- What would be a good Gas-phase chemistry + aerosol scheme to simulate BB emissions including primary BB aerosol emissions?
Best regards,
Karen Ballesteros
View attachment namelist.input
&chem
kemit = 1,
chem_opt = 201, 201, 201,
bioemdt = 30, 30, 30,
photdt = 30, 30, 30,
chemdt = 10, 10, 10,
io_style_emissions = 1,
emiss_opt = 10, 10, 10,
emiss_inpt_opt = 102,
chem_in_opt = 0, 0, 0,
phot_opt = 1, 1, 1,
gas_drydep_opt = 1, 1, 1,
aer_drydep_opt = 1, 1, 1,
bio_emiss_opt = 3, 3, 3,
ne_area = 400,
depo_fact = 0.25,
dust_opt = 3,
dmsemis_opt = 1,
seas_opt = 2,
gas_bc_opt = 1, 1, 1,
gas_ic_opt = 1, 1, 1,
aer_bc_opt = 1, 1, 1,
aer_ic_opt = 1, 1, 1,
gaschem_onoff = 1, 1, 1,
aerchem_onoff = 1, 1, 1,
wetscav_onoff = 0, 0, 0,
cldchem_onoff = 0, 0, 0,
vertmix_onoff = 1, 1, 1,
chem_conv_tr = 1, 1, 1,
conv_tr_wetscav = 0, 0, 0,
conv_tr_aqchem = 0, 0, 0,
biomass_burn_opt = 3, 3, 3,
scale_fire_emiss = .true., .true., .true.,
plumerisefire_frq = 15, 15, 15,
have_bcs_chem = .true., .true., .true.,
aer_ra_feedback = 1,
aer_op_opt = 1,
opt_pars_out = 0,
diagnostic_chem = 0,
/
I have been working with WRF-Chem for quite some time now, but only recently started using it to simulate transport and transformation of Biomass Burning emissions, and would like to ask you a question.
Our set-up is MOZART-MOSAIC 4BIN. We are including BB emissions from the FINN emission inventory. However, it seems that the MOZART-MOSAIC options are not setup to work with the online plumerise. Only gas phase BB emissions are being mapped to the chemistry after the plume rise calculation.
- The question is.... is there an "easy" way to include also the primary OC and EC from BB into the MOSAIC scheme?
Or alternatively...
- What would be a good Gas-phase chemistry + aerosol scheme to simulate BB emissions including primary BB aerosol emissions?
Best regards,
Karen Ballesteros
View attachment namelist.input
&chem
kemit = 1,
chem_opt = 201, 201, 201,
bioemdt = 30, 30, 30,
photdt = 30, 30, 30,
chemdt = 10, 10, 10,
io_style_emissions = 1,
emiss_opt = 10, 10, 10,
emiss_inpt_opt = 102,
chem_in_opt = 0, 0, 0,
phot_opt = 1, 1, 1,
gas_drydep_opt = 1, 1, 1,
aer_drydep_opt = 1, 1, 1,
bio_emiss_opt = 3, 3, 3,
ne_area = 400,
depo_fact = 0.25,
dust_opt = 3,
dmsemis_opt = 1,
seas_opt = 2,
gas_bc_opt = 1, 1, 1,
gas_ic_opt = 1, 1, 1,
aer_bc_opt = 1, 1, 1,
aer_ic_opt = 1, 1, 1,
gaschem_onoff = 1, 1, 1,
aerchem_onoff = 1, 1, 1,
wetscav_onoff = 0, 0, 0,
cldchem_onoff = 0, 0, 0,
vertmix_onoff = 1, 1, 1,
chem_conv_tr = 1, 1, 1,
conv_tr_wetscav = 0, 0, 0,
conv_tr_aqchem = 0, 0, 0,
biomass_burn_opt = 3, 3, 3,
scale_fire_emiss = .true., .true., .true.,
plumerisefire_frq = 15, 15, 15,
have_bcs_chem = .true., .true., .true.,
aer_ra_feedback = 1,
aer_op_opt = 1,
opt_pars_out = 0,
diagnostic_chem = 0,
/