# PHYSICS_SUITE = HI-RES
#
# Note: The following namelist parameters were taken from the namelist.input.4km
# file included with the official NCAR WRF source code release. It was
# designed for a 4km primary domain with 1.33km and 444.4m child domains.
# you do not have to match the DX values in your configuration but it
# should be in the ballpark. Having a DX much less than 444m will likely
# require turning OFF the PBL scheme. See the LES physics suite below.
#
# Finally, you may also use this same suite for running a single nest. The
# UEMS will eliminate the 3rd row for you.
#
# &physics parameters:
#
# CU_PHYSICS = 0, 0, 0 None
# MP_PHYSICS = 8, 8, 8 New Thompson graupel scheme
# RA_LW_PHYSICS = 4, 4, 4 RRTMG scheme
# RA_SW_PHYSICS = 4, 4, 4 RRTMG scheme
# RADT = 10,10,10
# SF_SURFACE_PHYSICS = 2, 2, 2 Unified Noah LSM
# SF_SFCLAY_PHYSICS = 1, 1, 1
# BL_PBL_PHYSICS = 1, 1, 1
# BLDT = 0, 0, 0 Call PBL every timestep
# YSU_TOPDOWN_PBLMIX = 1 Turn ON
# SHCU_PHYSICS = 0 Avoid GRIMS shallow CU scheme
#
# &dynamics parameters:
#
# W_DAMPING = 0
# DIFF_OPT = 1, 1, 1
# KM_OPT = 4, 4, 4
# DIFF_6TH_OPT = 0, 0, 0
# DAMP_OPT = 3
# MOIST_ADV_OPT = 2, 2, 2
# SCALAR_ADV_OPT = 2, 2, 2
#
# &domains parameters:
#
# FEEDBACK = 1
# SMOOTH_OPTION = 0
#
#
# PHYSICS_SUITE = MESO-LES
#
# Note: The following namelist parameters were designed for running a nested mesoscale
# to LES simulation where the DX for each domain is 3000m -> 1000m -> 333.3m -> 111.1m.
#
# Finally, this suite was tested over the Midwest US, which is relatively flat.
# you may need to modify the configuration for complex terrain.
#
# &physics parameters:
#
# CU_PHYSICS = 0, 0, 0, 0 None
# MP_PHYSICS = 28, 28, 28, 28 Thompson Scheme
# RA_LW_PHYSICS = 4, 4, 4, 4 RRTMG scheme
# RA_SW_PHYSICS = 4, 4, 4, 4 RRTMG scheme
# RADT = 10,10,10,10
# SF_SURFACE_PHYSICS = 2, 2, 2, 2 Unified Noah LSM
# SF_SFCLAY_PHYSICS = 1, 1, 1, 1
# BL_PBL_PHYSICS = 1, 0, 0, 0 Yonsei University scheme
# BLDT = 0 Call PBL every timestep (For domain 1)
# YSU_TOPDOWN_PBLMIX = 1 Turn ON
# ICLOUD = 1
# SHCU_PHYSICS = 0 Avoid GRIMS shallow CU scheme
#
# &dynamics parameters:
#
# W_DAMPING = 0
# DIFF_OPT = 1, 2, 2, 2
# KM_OPT = 4, 5, 5, 5
# DIFF_6TH_OPT = 0, 0, 0
# DAMP_OPT = 3
# MOIST_ADV_OPT = 2, 2, 2
# SCALAR_ADV_OPT = 2, 2, 2
#
# &domains parameters:
#
# FEEDBACK = 1
# SMOOTH_OPTION = 0
#
#
# PHYSICS_SUITE = LES
#
# Note: The following namelist parameters were designed for running a nested LES
# simulation where the DX for each domain is 1000m -> 333.3m -> 111.1m. You
# may also use this same suite for running a single nest. The UEMS will
# eliminate the 3rd row.
#
# This configuration was taken from the test/em_real/namelist.input.pbl-les
# file included with the official NCAR WRF source code release.
#
# Finally, this suite was tested over the Midwest US, which is relatively flat.
# you may need to modify the configuration for complex terrain.
#
#
# &physics parameters:
#
# CU_PHYSICS = 0, 0, 0 None
# MP_PHYSICS = 8, 8, 8 New Thompson graupel scheme
# RA_LW_PHYSICS = 4, 4, 4 RRTMG scheme
# RA_SW_PHYSICS = 4, 4, 4 RRTMG scheme
# RADT = 10,10,10
# SF_SURFACE_PHYSICS = 2, 2, 2 Unified Noah LSM
# SF_SFCLAY_PHYSICS = 1, 1, 1
# BL_PBL_PHYSICS = 1, 0, 0 Yonsei University scheme
# BLDT = 0, 0, 0 Call PBL every timestep
# YSU_TOPDOWN_PBLMIX = 1 Turn ON
# ICLOUD = 1
# SHCU_PHYSICS = 0 Avoid GRIMS shallow CU scheme
#
# &dynamics parameters:
#
# W_DAMPING = 0
# DIFF_OPT = 1, 2, 2
# KM_OPT = 4, 3, 3
# DIFF_6TH_OPT = 0, 0, 0
# DAMP_OPT = 3
# MOIST_ADV_OPT = 2, 2, 2
# SCALAR_ADV_OPT = 2, 2, 2
#
# &domains parameters:
#
# FEEDBACK = 1
# SMOOTH_OPTION = 0
