WRF.exe running wrong for aercu_opt=1or2

[yijing_5566520]

when i set mp_physics=40,cu_physics=11and aercu_opt =1or2 ,I found the error appear
:forrtl: severe (174): SIGSEGV, segmentation fault occurred
Image PC Routine Line Source
wrf.exe 0000000004AC0C94 for__signal_handl Unknown Unknown
libpthread-2.17.s 00002BA06BE715E0 Unknown Unknown Unknown
wrf.exe 0000000003560240 Unknown Unknown Unknown
wrf.exe 000000000355EFB8 Unknown Unknown Unknown
wrf.exe 000000000353B5D1 Unknown Unknown Unknown
wrf.exe 0000000002D5B097 Unknown Unknown Unknown
wrf.exe 00000000023A5EB1 Unknown Unknown Unknown
wrf.exe 0000000001D958B1 Unknown Unknown Unknown
wrf.exe 000000000040DF55 Unknown Unknown Unknown
wrf.exe 000000000040CDF5 Unknown Unknown Unknown
wrf.exe 000000000040CD9E Unknown Unknown Unknown
libc-2.17.so 00002BA06C09FC05 __libc_start_main Unknown Unknown
wrf.exe 000000000040CCA9 Unknown Unknown Unknown
when i set mp_physics =40 ,cu_physics=11and aercu_opt =0 wrf.exe running ok ,so my question is if the option aercu_opt set need other Special Settings or not.
I will be deeply appreciated that you have done for me and look forward to your reply.

my namelist.input is seted as below

&time_control
run_days = 0,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2015, 2014, 2999,
start_month = 03, 12, 06,
start_day = 12, 30, 11,
start_hour = 00, 00, 12,
start_minute = 00, 00, 00,
start_second = 00, 00, 00,
end_year = 2015,2015, 2999,
end_month = 03, 01, 06,
end_day = 15, 08, 12,
end_hour = 00, 00, 12,
end_minute = 00, 00, 00,
end_second = 00, 00, 00,
interval_seconds = 21600
input_from_file = .true.,.true.,.true.,
history_interval = 60, 60, 60,
frames_per_outfile = 1, 1000, 1000,
restart = .false.,
restart_interval = 500000,
io_form_history = 2,
io_form_restart = 2,
io_form_input = 2,
io_form_boundary = 2,
auxinput4_inname = 'wrflowinp_d<domain>'
auxinput4_interval = 360,
io_form_auxinput4 = 0,
debug_level = 1000,
output_diagnostics = 1,
io_form_auxhist3 = 2,
auxhist3_interval = 1440,
frames_per_auxhist3 = 1,
force_use_old_data = T
/
&domains
time_step = 60,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 1,
e_we = 208, 145, 94,
e_sn = 97, 124, 91,
e_vert = 40, 32, 20,
eta_levels = 1.000, 0.995, 0.990, 0.985, 0.980,0.975, 0.970, 0.960,
0.950, 0.940,0.930, 0.920, 0.910, 0.900, 0.890,0.880,
0.860, 0.8338386, 0.7876773, 0.741516, 0.6953547, 0.6149445, 0.5417048, 0.4751021,
0.4146363, 0.3598392, 0.3102725, 0.265526, 0.2252167, 0.1889867, 0.1565017, 0.1274503,
0.1017843, 0.07977638, 0.06090509, 0.04472341, 0.03084801, 0.01895018, 0.008748077, 0.000,
dx = 27000, 3000, 6666.66,
dy = 27000, 3000, 6666.66,
p_top_requested = 1000,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
grid_id = 1, 2, 3,
parent_id = 0, 1, 2,
i_parent_start = 1, 49, 30,
j_parent_start = 1, 51, 30,
parent_grid_ratio = 1, 3, 3,
parent_time_step_ratio = 1, 3, 3,
feedback = 0,
smooth_option = 0,
/
&physics
mp_physics = 40, 2, 2,
progn = 0 , 1, 0,
naer = 1e9
ra_lw_physics = 4, 4, 1,
ra_sw_physics = 4, 5, 2,
radt = 3, 3, 10,
sf_sfclay_physics = 1, 1, 1,
sf_surface_physics = 2, 2, 2,
bl_pbl_physics = 1, 1, 1,
mfshconv = 0,
bldt = 0, 0, 0,
cu_physics = 11, 5, 0,
cu_diag = 0, 1, 0,
kf_edrates =1
cugd_avedx = 3,
cudt = 0, 0, 1,
ishallow = 1,
isfflx = 1,
ifsnow = 0,
icloud = 1,
surface_input_source = 3,
num_soil_layers = 4,
num_land_cat = 24,
sf_urban_physics = 1, 0, 0,
aercu_opt = 2
alevsiz_cu = 30,
no_src_types_cu = 10
scalar_pblmix = 1
mp_zero_out = 2,
cu_rad_feedback = .ture.,
topo_wind = 0,
usemonalb = .true.,
sst_update = 0,
sst_skin = 0,
/
&fdda
/
&dynamics
w_damping = 1,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2
khdif = 0, 0, 0,
kvdif = 0, 0, 0,
non_hydrostatic = .true., .true., .true.,
moist_adv_opt = 2, 1, 1,
scalar_adv_opt = 2, 1, 1,
chem_adv_opt = 2, 1, 1,
tke_adv_opt = 2, 2, 0,
gwd_opt = 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,
nested = .false., .true., .true.,
/
&grib2
/

&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/

 

[kwerner]

Hi,
Can you let me know which version of WRF you are using, and can you attach your output log(s) so that I can take a look? If you have multiple output files (e.g., rsl.error.* and rsl.out.*), please package those all together in one *.tar file and attach that. To attach files, when you're in the post text box, click on the tab below with the 3 horizontal lines.

Thanks!