Hi,
I keep getting errors in the process of generating prediction fields(trajectory for adjoint run) using WRFPLUS to calculate FSO.
The model is run using mpirun -n 3 wrf.exe
If more than 4 CPUs are used, only the following process is calculated and the model is no longer calculated.
<rsl.out.0000>
Ntasks in X 4 , ntasks in Y 4
Setting blank km_opt entries to domain #1 values.
--> The km_opt entry in the namelist.input is now max_domains.
Setting blank diff_opt entries to domain #1 values.
--> The diff_opt entry in the namelist.input is now max_domains.
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain 1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain 2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 2, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 2, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
Need MYNN PBL for icloud_bl = 1, resetting to 0
--- NOTE: RRTMG radiation is not used, setting: o3input=0 to avoid data pre-processing
*************************************
No physics suite selected.
Physics options will be used directly from the namelist.
*************************************
--- NOTE: num_soil_layers has been set to 4
WRF V3.9.1 MODEL
*************************************
Parent domain
ids,ide,jds,jde 1 352 1 352
ims,ime,jms,jme -4 95 -4 95
ips,ipe,jps,jpe 1 88 1 88
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1 , 1746440840 bytes allocated
med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain 1: 29.93507 elapsed seconds
Max map factor in domain 1 = 1.05. Scale the dt in the model accordingly.
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
Skipping over LUTYPE = USGS
LANDUSE TYPE = MODIFIED_IGBP_MODIS_NOAH FOUND 20 CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19 CATEGORIES
Max map factor in domain 1 = 1.05. Scale the dt in the model accordingly.
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
Skipping over LUTYPE = USGS
LANDUSE TYPE = MODIFIED_IGBP_MODIS_NOAH FOUND 20 CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19 CATEGORIES
*************************************
Nesting domain
ids,ide,jds,jde 1 250 1 361
ims,ime,jms,jme -4 73 -4 100
ips,ipe,jps,jpe 1 63 1 90
INTERMEDIATE domain
ids,ide,jds,jde 143 398 125 491
ims,ime,jms,jme 138 216 120 225
ips,ipe,jps,jpe 141 206 123 215
*************************************
d01 2018-08-28_06:00:00 alloc_space_field: domain 2 , 397765000 bytes allocated
d01 2018-08-28_06:00:00 alloc_space_field: domain 2 , 1440220176 bytes allocated
d01 2018-08-28_06:00:00 *** Initializing nest domain # 2 from an input file. ***
The model is not turned off and nothing is produced.
Using 200 cpu and waiting 3 hours, nothing was calculated.
The same phenomenon occurs in WRFPLUS V3.8, V3.9.1 and V4.1.
Below is the namelist.input I used.
What is the problem?
Please help.
<namelist.input>
&time_control
run_days = 0,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2018, 2018, 2018,
start_month = 08, 08, 08,
start_day = 28, 28, 28,
start_hour = 06, 06, 06,
start_minute = 00, 00, 00,
start_second = 00, 00, 00,
end_year = 2018, 2018, 2018,
end_month = 08, 08, 08,
end_day = 28, 28, 28,
end_hour = 18, 18, 18,
end_minute = 00, 00, 00,
end_second = 00, 00, 00,
interval_seconds = 21600,
input_from_file = .true., .true., .true.,
fine_input_stream = 0, 0, 0,
history_interval = 540, 180, 60,
frames_per_outfile = 1, 1, 1,
restart = .false.,
restart_interval = 7200,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
/
&domains
time_step = 30,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 3,
e_we = 352, 250, 226,
e_sn = 352, 361, 196,
e_vert = 60, 60, 60,
p_top_requested = 5000,
num_metgrid_levels = 32,
num_metgrid_soil_levels = 4,
dx = 9000, 3000, 1000,
dy = 9000, 3000, 1000,
grid_id = 1, 2, 3,
parent_id = 0, 1, 2,
i_parent_start = 1, 145, 78,
j_parent_start = 1, 127, 155,
parent_grid_ratio = 1, 3, 3,
parent_time_step_ratio = 1, 3, 3,
feedback = 1,
smooth_option = 1,
/
&physics
mp_physics = 16, 16, 16,
ra_lw_physics = 1, 1, 1,
ra_sw_physics = 1, 1, 1,
radt = 10, 10, 10,
sf_sfclay_physics = 1, 1, 1,
sf_surface_physics = 2, 2, 2,
bl_pbl_physics = 1, 1, 1,
bldt = 0, 0, 0,
cu_physics = 1, 1, 0,
cudt = 5, 5, 5,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
sf_urban_physics = 0, 0, 0,
sst_update = 0,
do_radar_ref = 1,
/
&fdda
/
&dynamics
w_damping = 0,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2
khdif = 0, 0, 0,
kvdif = 0, 0, 0,
non_hydrostatic = .true., .true., .true.,
moist_adv_opt = 1, 1, 1,
scalar_adv_opt = 1, 1, 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,
nested = .false., .true., .true.,
/
&grib2
/
&perturbation
trajectory_io=true,
jcdfi_use=false,
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
Thanks for your help!
Best regards,
Ji-Won Lee
I keep getting errors in the process of generating prediction fields(trajectory for adjoint run) using WRFPLUS to calculate FSO.
The model is run using mpirun -n 3 wrf.exe
If more than 4 CPUs are used, only the following process is calculated and the model is no longer calculated.
<rsl.out.0000>
Ntasks in X 4 , ntasks in Y 4
Setting blank km_opt entries to domain #1 values.
--> The km_opt entry in the namelist.input is now max_domains.
Setting blank diff_opt entries to domain #1 values.
--> The diff_opt entry in the namelist.input is now max_domains.
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain 1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain 2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 2, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 2, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
Need MYNN PBL for icloud_bl = 1, resetting to 0
--- NOTE: RRTMG radiation is not used, setting: o3input=0 to avoid data pre-processing
*************************************
No physics suite selected.
Physics options will be used directly from the namelist.
*************************************
--- NOTE: num_soil_layers has been set to 4
WRF V3.9.1 MODEL
*************************************
Parent domain
ids,ide,jds,jde 1 352 1 352
ims,ime,jms,jme -4 95 -4 95
ips,ipe,jps,jpe 1 88 1 88
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1 , 1746440840 bytes allocated
med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain 1: 29.93507 elapsed seconds
Max map factor in domain 1 = 1.05. Scale the dt in the model accordingly.
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
Skipping over LUTYPE = USGS
LANDUSE TYPE = MODIFIED_IGBP_MODIS_NOAH FOUND 20 CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19 CATEGORIES
Max map factor in domain 1 = 1.05. Scale the dt in the model accordingly.
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
Skipping over LUTYPE = USGS
LANDUSE TYPE = MODIFIED_IGBP_MODIS_NOAH FOUND 20 CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19 CATEGORIES
*************************************
Nesting domain
ids,ide,jds,jde 1 250 1 361
ims,ime,jms,jme -4 73 -4 100
ips,ipe,jps,jpe 1 63 1 90
INTERMEDIATE domain
ids,ide,jds,jde 143 398 125 491
ims,ime,jms,jme 138 216 120 225
ips,ipe,jps,jpe 141 206 123 215
*************************************
d01 2018-08-28_06:00:00 alloc_space_field: domain 2 , 397765000 bytes allocated
d01 2018-08-28_06:00:00 alloc_space_field: domain 2 , 1440220176 bytes allocated
d01 2018-08-28_06:00:00 *** Initializing nest domain # 2 from an input file. ***
The model is not turned off and nothing is produced.
Using 200 cpu and waiting 3 hours, nothing was calculated.
The same phenomenon occurs in WRFPLUS V3.8, V3.9.1 and V4.1.
Below is the namelist.input I used.
What is the problem?
Please help.
<namelist.input>
&time_control
run_days = 0,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2018, 2018, 2018,
start_month = 08, 08, 08,
start_day = 28, 28, 28,
start_hour = 06, 06, 06,
start_minute = 00, 00, 00,
start_second = 00, 00, 00,
end_year = 2018, 2018, 2018,
end_month = 08, 08, 08,
end_day = 28, 28, 28,
end_hour = 18, 18, 18,
end_minute = 00, 00, 00,
end_second = 00, 00, 00,
interval_seconds = 21600,
input_from_file = .true., .true., .true.,
fine_input_stream = 0, 0, 0,
history_interval = 540, 180, 60,
frames_per_outfile = 1, 1, 1,
restart = .false.,
restart_interval = 7200,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
/
&domains
time_step = 30,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 3,
e_we = 352, 250, 226,
e_sn = 352, 361, 196,
e_vert = 60, 60, 60,
p_top_requested = 5000,
num_metgrid_levels = 32,
num_metgrid_soil_levels = 4,
dx = 9000, 3000, 1000,
dy = 9000, 3000, 1000,
grid_id = 1, 2, 3,
parent_id = 0, 1, 2,
i_parent_start = 1, 145, 78,
j_parent_start = 1, 127, 155,
parent_grid_ratio = 1, 3, 3,
parent_time_step_ratio = 1, 3, 3,
feedback = 1,
smooth_option = 1,
/
&physics
mp_physics = 16, 16, 16,
ra_lw_physics = 1, 1, 1,
ra_sw_physics = 1, 1, 1,
radt = 10, 10, 10,
sf_sfclay_physics = 1, 1, 1,
sf_surface_physics = 2, 2, 2,
bl_pbl_physics = 1, 1, 1,
bldt = 0, 0, 0,
cu_physics = 1, 1, 0,
cudt = 5, 5, 5,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
sf_urban_physics = 0, 0, 0,
sst_update = 0,
do_radar_ref = 1,
/
&fdda
/
&dynamics
w_damping = 0,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2
khdif = 0, 0, 0,
kvdif = 0, 0, 0,
non_hydrostatic = .true., .true., .true.,
moist_adv_opt = 1, 1, 1,
scalar_adv_opt = 1, 1, 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,
nested = .false., .true., .true.,
/
&grib2
/
&perturbation
trajectory_io=true,
jcdfi_use=false,
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
Thanks for your help!
Best regards,
Ji-Won Lee