idealized cases

Dear Community, I am currently working on generating wind velocity simulations based on changes in radiation, specifically for simulating sea-breeze phenomena. Through a Google search, I discovered that the idealized case em_seabreeze2d_x in WRF can assist me in achieving this simulation...

Hi WRF experts/ users, is it possible to use the specified lateral boundary conditions for idealized conditions sans nesting? If so, how do we do this?

Hi, WRF support: I want to change Soil heat capacity (C), thermal diffusivity (Kt), and thermal inertia (Iq), in such a way that they remain constant during the integration time. Where should I make these modifications, and what is the specific code?How to change the height of vertical soil...

Hello, I am aware that I am able to run a 2d squall line in either the x or y direction using WRF, but I am curious if there is a way to produce 3D output from these simulations? Specifically, I am interested in 3D reflectivity. Thank you!

Dear WRF Community, I am planning to perform some idealized simulations using the em_hill2D test case provided in WRF. I have two questions for these tests. 1. I am wondering if there is a possibility of running the em_hill2D test case with a non-stretching grid. 2. How do I control Upper...

Hi, all 1、I wrote a basic initial field environment file based on the solution of the equatorial wave equation. I positioned its initial time at 2021-01-01_00 and converted it into a file in met*nc format. 2、I want to Run it for 90 days to see if it can produce some weather-scale fluctuations...

Hello, I would like to run a WRF idealised simulation prescribing a 3D wind field. I have modified module_initialize_ideal.F accordingly, following the example of the 'em_b_wave 'case for which a 2D wind field is prescribed, and got my wrfinput file ready to go. However, I don't quite...

This is WRFV4.5.1 on aws Graviton3, using: Currently Loaded Modules: 1) dmidecode/3.5 5) libevent/2.1.12 9) zlib/1.3 2) numactl/2.0.16 6) pmix/5.0.1 10) hdf5/1.14.2 3) binutils/2.41 7) hwloc/2.9.2 11) netcdf/c-4.9.2-fortran-4.6.1 4) gcc/13.2.0 8) openmpi/4.1.6...

I have generated an analysis after the EnKF and now I want to link it as wrfinput to run wrf-les, but a segment fault always happens when the run just begins. I'm sure my disk and memory are sufficient and time_step is suitable. How can I run the wrf-les with this file? I wonder whether I can...

Dear all： when compiling the ideal model in em_ Les,I chose sf_ Surface_ Phycics=2, and then an error is reported as： -------------- FATAL CALLED --------------- FATAL CALLED FROM FILE: <stdin> LINE: 1959 Land Use Dataset '' not found in VEGPARM.TBL. So I'm confused about when compiling...

Hello, I ran some cases with the Idealized TC with various values of SST (by modifying the 'module_initialize_tropical_cyclone.F'). The values of 10m max windspeed tend to converge after 15 days. I wanted to know the effects of changing sea surface temperature on TC. Are the values I modified...

Hi, WRF support: The fact that SMOIS and TSLB in the wrfout became 0 over the ocean after I added some land in an ideal experiment seems unreasonable to me. Could you please explain the reason for this? Attached is a figure. The second question: I would like to know the most effective way to...

Hi, I just start learning WRF. I wanner repeat the results of this article. "Simulating nuclear cloud rise within a realistic atmosphere using the Weather Research and Forecasting model " I ran WRF4.2 in ubuntu18.04. And, I tried to set up a warm bubble in em_quarter_ss case. Now I want to add...

Hello! I've successfully set up WRF and have also run a couple of the test cases included in WRF4.4.1 (em_fire, em_quarter_ss). These runs are successful as well and output the standard `wrfout_d01_0001-01-01_00:00:00` type files. I then attempt to visualize these files (example, SLP) using...

Hello! I've successfully set up WRF and have also run a couple of the test cases included in WRF4.4.1 (em_fire, em_quarter_ss). These runs are successful as well and output the standard `wrfout_d01_0001-01-01_00:00:00` type files. I then attempt to visualize these files (example, SLP) using...

Dear WRF Community, I am trying to run a simulation to study the urban heat island problem. To do this, my plan is to run an idealized WRF simulation prescribing heating over a flat surface or a mountain. Any help would be highly appreciated. Thanks in advance. With Kind Regards Shak

I'm working on idealized simulation using WRF-ARW version 3.9.1.1, actually NASA-Unified WRF based on that version. My final goal is simulation of pyro-cumulus and tracking tracers emitted from wildfire. Now I'm doing sanity check simulations with an idealized configuration without giving any...

I can successfully run the default tropical cyclone case, but I have the following problems: 1. How to change the position of the inserted TC? README says it located at the model domain center. But I don't know how to modify it in my own case. 2. I want TC to land in my requested area or...

Hi everyone, I need help with changing the axis of my plots from the domains to the variable unit. For example from bottom_top to meters or kilometers and from west-east to like temp in Kelvin. Attached is a copy of what i have now

Hello, I am attempting to run the idealized tropical cyclone test case (em_tropical_cyclone) on Cheyenne. I am just using the default namelist settings. I have successfully configured WRF (1st option = 15 and 2nd = 1), successfully compiled the test case, and ideal.exe seems to have run...